Influence of Occupational Health and Safety System Implementation on Occupational Diseases to Factory Workers
DOI:
https://doi.org/10.30994/jqph.v6i1.407Keywords:
ergonomic, occupational diseases, occupational health and safety (OHS)Abstract
Occupational health and safety system (OHS) is expected to prevent occupational diseases, incidents during work, and to guarantee the protection of workers. They should integrate the OHS system in its management. As a result, there is a feasibility of minimizing occupational diseases in factory workers because of the efficiency protection from the OHS division. The study used a literature review that aims to identify the implementation of OHS system and to lessen ocupational diseases on factory workers. The utilized database programs were Google Scholar, PubMed, Science Direct, and PEDro using the keywords Ergonomic, OHS, and occupational diseases. There were found 10 articles related to the topic that was published from 2019 to 2021. Six of them were from Indonesia’s journal while the rest were from international journal.Many big factories had already applied the OHS system in Indonesia to ensure the safety of their workers whereas the OHS meeting was less important to be discussed in Sweden.There was a particular disease that could not be avoided such as hearing disorders due to the continuously high-intensity noise exposure. However, OHS system had succeed to measure the danger level of an activity at work and minimize the casualties.
References
Aalto‐Korte, K., Koskela, K., & Pesonen, M. (2020). Construction workers’ skin disorders in the Finnish Register of Occupational Diseases in 2005−2016. Contact Dermatitis. DOI: 10.1111/cod.13648.
Ahyanti, M., & Purwono. (2019). Risiko Penyakit Kulit Akibat Kerja di Perusahaan Perkebunan dan Pengolahan Karet. Jurnal Kesehatan, 10(1).
Akbar, J. F., & Purwanggono, B. (2020). Formulasi Framework Sistem Manajemen Keselamatan dan Kesehatan Kerja ISO 450001:2018 pada PT. XYZ. Prosiding PPIS, 165-172.
Binwasnaker. (2020). Menaker: Jadikan K3 sebagai Prioritas dalam Bekerja. Retrieved on 29 Agustus 2021 from https://kemnaker.go.id/news/detail/menaker-jadikan-k3-sebagai-prioritas-dalam-bekerja.
Fajrianti, G. (2020). Analisis Penerapan Pemantauan Kinerja pada Karyawan oleh Unit Bagian Keselamatan Kerja (K3) di PT Dok dan Perkapalan Air Kantung Tahun 2019. JURNAL SMART ANKES, 3(1), 17-24.
ILO. (2021). The Enormous Burden of Poor Working Conditions. Retrieved on 18 Agustus 2021 from https://www.ilo.org/moscow/areas-of-work/occupational-safety-and-health/WCMS_249278/lang--en/index.html.
Imran, A. R. (2020). Identifikasi HAZARD pada Proses Produksi Billet pada Area Tungku Peleburan dengan Metode HIRARC (Studi Kasus: PT. XYZ). Jurnal Ilmiah Teknik Industri, 8(3), 153 – 160. DOI: 10.24912/jitiuntar.v8i3.6676.
Kemnaker. (2012). Peraturan Pemerintah Republik Indonesia Nomor 50 Tahun 2012 tentang Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja. Retrieved on 18 Agustus 2021 from https://jdih.kemnaker.go.id/katalog-58-Peraturan%20Pemerintah.html.
Lornudd, C., Frykman, M., Stenfors, T., Ebbevi, D., Hasson, H., Sundberg, J. C., & Schwarz, T. U. (2021). A champagne tower of influence: An interview study of how corporate boards enact occupational health and safety. Safety Science, 143. DOI: 10.1016/j.ssci.2021.105416.
Mayadilanuari, A. M. (2020). Penggunaan HIRARC dalam Identifikasi Bahaya dan Penilaian Risiko pada Pekerjaan Bongkar Muat. HIGEIA Journal of Public Health Research and Development, 4(2). DOI: 10.15294/higeia/v4i2/30908.
Ponda, H., & Fatma, F. N. (2019). Identifikasi Bahaya, Penilaian dan Pengendalian Risiko Keselamatan dan Kesehatan Kerja (K3) pada Departemen Foundry PT. Sicamindo. HEURISTIC Jurnal Teknik Industri, 16(2), 62-74. DOI: 10.30996/he.v16i2.2968.
Robinson, T., Sussell, A., Yeoman, K., Retzer, K., & Poplin, G. (2020). Health conditions in retired manual labor miners and oil and gas extraction workers: National Health Interview Survey, 2007–2017. American Journal of Industrial Medicine. DOI: 10.1002/ajim.23195.
Russo, F., Di Tecco, C., Fontana, L., Adamo, G., Papale, A., Denaro, V., & Iavicoli, S. (2020). Prevalence of work related musculoskeletal disorders in Italian workers: is there an underestimation of the related occupational risk factors? BMC Musculoskeletal Disorders, 21(1). DOI: 10.1186/s12891-020-03742-z.
Sahupala, P., & Cipto, C. (2019). Analisa Keselamatan dan Kesehatan Kerja dalam Mengidentifikasi Dampak Tingkat Kebisingan terhadap Pekerja pada Pembangkit Listrik Tenaga Disel PLTD Kelapa Lima Merauke. Mustek Anim HA, 8(1), 75-84. DOI: 10.35724/mustek.v8i1.2526.
Santoso, G. (2004). Manajemen Keselamatan dan Kesehatan Kerja. Cetakan Pertama, Jakarta: Prestasi Pustaka.
Simanjuntak, M.P. B. (2019). Hubungan Komitmen K3 dengan Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja pada Divisi Utility di PT. Almasindo Bogor. Jurnal Ilmiah Wijaya, 11(2), 71-80.
So, Szeto, Lau, Dai, & Tsang. (2019). Effects of Ergomotor Intervention on Improving Occupational Health in Workers with Work-Related Neck-Shoulder Pain. International Journal of Environmental Research and Public Health, 16. DOI: 10.3390/ijerph16245005.
Tarwaka. (2008). Keselamatan dan Kesehatan Kerja (K3): Manajemen dan
Implementasi K3 di Tempat Kerja. Surakarta: Harapan Press.
Tarwaka. (2015). Keselamatan, Kesehatan Kerja dan Ergonomi (K3E) dalam
Perspektif Bisnis. Surakarta: Harapan Press.
Yoon, S. J., Lin, H. K., Chen, G., Yi, S., Choi, J., & Rui, Z. (2013). Effect of Occupational Health and Safety Management System on Work-Related Accident Rate and Differences of Occupational Health and Safety Management System Awareness between Managers in South Korea’s Construction Industry. Safety and Health at Work, 4(4), 201–209. DOI: 10.1016/j.shaw.2013.10.002.